If you’re trying to strip paint from furniture, there are a few things to consider. Stripping the paint is going to take a lot of hard work and time before you can make it look new again. This could be because the furniture is wooden and stripped this way requires sanding, or because it’s got old paint on it that has been baked on for decades. Picking the right stripper is essential for getting the best results though, so spend some time researching which type will work best for your purposes.
When you strip paint from a piece of furniture, there are many different ways to do so. The three common methods are using heat, using paint strippers, and sanding the surface. In this article, we are going to primarily focus on sanders as the title suggests.
If the paint is not already flaking off, it is better to use a paint and varnish remover denatured alcohol, etc. Once the solvent is dissolved, you just need to wipe it off or scrape. It will be a lot faster to remove the paint. Bear in mind that the paint may be baked on. In this case, you’ll need to sand it off but if it is still somewhat soft, you may be able to scrape it off with a wide blade.
If scrapping is not working, a good sander is a must. There are many types of sanders available from hand sanding to orbital and belt sanding. They come in a variety of sizes, from small palm sanders to big floor and stationary models. You will have to find which one would be the best for your furniture stripping project.
After doing some research, I found that Festool has a good line-up of sanders that are small, but powerful enough to deal with any type of furniture and finish. This is going to be ideal for those small and big jobs that have a tough surface. They aren’t very heavy but they produce more power than most other sanders on the market.
These are professional-grade sanders equipped with the best dust collection system. They are super quiet and can handle quite a bit without slowing down. It is no doubt that these sanders are very expensive but they are the best in the industry.
Are you planning to strip the paint off furniture? Before I go ahead and list out some of the best sanders for furniture stripping, let me tell you that there is a good alternative if you haven’t already considered it.
If the paint is not already flaking off, it is better to use a paint and varnish remover or denatured alcohol, etc. Once the solvent is dissolved, you just need to wipe it off or scrape. It will be a lot faster to remove the paint.
But if you think that it may become a lot messier and prefer to sanding using a sander instead, let’s move on.
Festool RO 90 FEQ Rotex Sander
| Specification | Details |
|---|---|
| Power Consumption | 400 watts, 3.3 amps, 120 V |
| Pad Size | 3-1/2″ (90 mm) dia |
| Speed (Eccentric) | 3,500–7,000 opm |
| Speed (Rotary) | 260–520 rpm |
| Sanding Stroke | 1/8″ (3 mm) |
| Dust Extraction Port | 27 mm |
| Weight | 3.3 lbs (1.5 kg) |
| Price | Check Amazon |
Festool RO 90 is one of the best sanders used by professionals. If you are using the sander for your client, then I would recommend going for this. This sander along with its Dust Collection system (separately purchased) makes wonders. You can work at your occupied client location, yet leave the place nice and clean. The best thing about this particular model is that you can switch between the round pad and the delta-shaped pad very easily. This gives much more flexibility. You don’t have to carry 2 different sanders, the round pad can be used for general sanding and the delta-shaped pad can be used for the corners and hard-to-reach tight areas.
Festool RTS 400 REQ Orbital Rectangular Sander
| Specification | Details |
|---|---|
| Voltage | 120 Volts |
| Weight | 2.5 lbs |
| Speed | 6,000 – 12,000 opm |
| Sanding Pad | 80 x 130 mm |
| Price | Check Amazon |
Festool RTS 400 is most useful to reach the corner or tight areas due to its design. You can use it to achieve a great finish or re-finish a myriad of surfaces with the ease of one-handed sanding. Equipped with optimally designed sanding pads to adapt to a variety of surfaces, shapes, and designs while providing industry-leading dust extraction results for a near-flawless finish every time. Reduce pad wear and protect adjacent surfaces with the included Protector that mounts quickly and easily without tools. Rubberized over-grip and improved ergonomics help to take the pain out of sanding and quality into the work you do. Dust port connection is robust and secure with improved bayonet-style retention compatible with Festool Dust Extractors. Or capture dust with the optional, reusable, Longlife Filter Bag with quick-release featuring extra-durable non-woven polyester for extra-long life for repeated fillings all while helping to maintain a cleaner work environment and better finish result.
Leave a Reply